Solar Connector Types for Power Stations: MC4, XT60, Anderson and DC5521
Safety: match the connector type, voltage and polarity to your power station’s input port before you plug anything in, and...
Safety: match the connector type, voltage and polarity to your power station’s input port before you plug anything in, and follow the manufacturer manual. Do not use damaged cables, keep connections dry unless they are rated for it, and ask the maker if the manual does not list an accessory as compatible.
Solar connector names confuse many owners. A panel ends in MC4 plugs, a power station may take XT60, Anderson, DC5521, DC7909 or DC8020, and the wrong match will not fit or, worse, will fit with the wrong polarity.
This guide explains the common connector types, using specifications from Amazon listings. It is general information. Check your power station and panel manuals before you connect anything.
MC4: The Panel Side
MC4 is the connector that most solar panels use. Listings describe MC4 plugs as waterproof with IP68 ratings and a press-to-release lock. A solar adapter cable has MC4 on one end and your station’s connector on the other.
XT60 and XT60i
XT60 is a compact two-pin plug that many portable power stations use for solar input. Listings describe the XT60i variant as preventing reverse connection. Cables in our best solar adapter cables list include XT60 and XT60i versions.
Anderson
Anderson is a larger two-pole connector. One listing describes an adjustable-polarity Anderson plug and warns that brands differ, so you must check positive and negative before use.
DC Barrel Jacks: DC5521, DC7909 and DC8020
These are cylindrical plugs defined by their diameters. Listings give DC5521 as 5.5 x 2.1 mm, DC7909 as 7.9 x 0.9 mm and DC8020 as 8.0 x 2.0 mm, plus a DC3.5 x 1.35 mm size. They look similar but are not interchangeable.
Polarity and Current
- Check positive and negative on both the panel cable and the station input before connecting.
- Match the cable gauge to the current your panel produces. Listings give ratings such as 28A for 12AWG and 9.4A for 14AWG.
- Do not exceed your station’s maximum solar input given in its manual.
- Keep connections dry unless rated for it.
Which Cable Should You Buy
Pick the connector your station uses, then the gauge for your panel. A multi-connector cable such as the SunJack 4-way or the Tonton 7-in-1 is useful if you may change stations. See our best solar adapter cables guide for options.
Power Banks to Consider
Two multi-connector cables, based on their listings:
- SunJack MC4 4-way cable: MC4 to XT60, Anderson, DC7909 and DC8020 at 12AWG
- Tonton 7-in-1 kit: seven adapters including barrel jacks
These are manufacturer claims, so follow the manual.
Frequently Asked Questions
What does MC4 mean?
It is the standard solar panel connector. The cable end that plugs into the panel is MC4.
Are DC5521 and DC8020 the same?
No. They differ in diameter, per the listings, and are not interchangeable.
What is XT60i?
A variant of XT60 that listings say prevents reverse connection.
How do I check polarity?
Use the markings in the manuals and on the connectors. If unsure, ask the maker.
Related Guides
- Best solar adapter cables
- Best car charging cables
- Foldable solar panels
- Best small power stations for camping
